Diy Unfinished
 |
 MISSION OTTOMAN DIY UNFINISHED FURNITURE KIT FOOTSTOOL $149.00 Time Remaining: 27d 4h 42m Buy It Now for only: $149.00 |
 CORNER CHAIR DIY UNFINISHED FURNITURE KIT MAPLE $359.00 Time Remaining: 8d 4h 58m Buy It Now for only: $359.00 |
 48 BENCH DIY UNFINISHED FURNITURE KIT SOLID MAPLE $149.00 Time Remaining: 27d 9h 34m Buy It Now for only: $149.00 |
DIY Tips For Installing Your Timber Flooring
When it comes to installing your new timber floor, there are two types you will need to decide on. Harwood flooring comes as either 1/ Unfinished 2/ Pre-finished. For a less labor-intensive install many people go for the pre-finished flooring. Read on for the full details...
With the unfinished product there is additional time required in preparing the timber and it also requires acclimatizing. But the experts would suggest the extra effort is worth it and pays off in the long run. The instinctive beauty of a naturally sanded floor is second to none.
Any professionally installed pre-finished timber floor comes down to how well you prepare the sub floor prior to laying the timber boards. If not done in the correct manner and leaving uneven surfaces will result in permanent squeaking and an overall poor performance.
On completion of laying the sub floor, rosin paper should be used to separate both the timber floor and the sub floor. This measure will prevent friction and contact between the two surfaces. Without applying this step, your new flooring will not perform to its peak.
When you nail the boards, make sure you use a nail gun that hides the nails. Timber flooring installations require a special nail gun called a blind nailer. Installing your timber floors requires much thought and patience for that professional look. If you are undertaking this project as a once off, consider hiring a pneumatic blind nail gun instead of buying.
Although this may seem fairly insignificant, it's important to make sure the very first board is laid to perfection, as this sets the tone for the following boards. If there is even the slightest of error at the start, this error will grow as you progress. Ensure the boards are always square as you move across the floor.
Ensuring you allow additional timber flooring than the net estimate will ensure you have extra stock in case you make unexpected errors.
Applying the finish in the correct manner will seem like all your hard work was worth it. We suggest you practice on some left over panels before applying the finishing coats. We hope your next DIY project is a real success!
About the Author
Not quite ready to tackle your first DIY project? Visit our carpet website and drop us an email for free advice. Also take the opportunity to check out our carpet Brisbane prices and let us save you money.
On DIY: A Monument to Projects Unfinished